![]() USB hubs could cause power issues, or you may need a powered USB hub.Īdditionally, try all USB ports on the DAW computer as some manufacturers have USB ports that are not fully powered. SSL do not sell USB cables independent of the cables included with the product.Įnsure that you are plugged directly into the DAW computer and not using a USB hub. On Windows, as a test you may also wish to toggle the Power Management tab settings in the Device Manager USB controllers section. If you need longer than 3 meters, you may need to add a powered USB hub, though hubs can sometimes introduce their own issues. Some computers have USB ports that are not fully 5V powered, or not always-on, so try all USB ports. If you have problems with any 3rd party cable, please try the included cables.Įnsure that you are plugged directly into the computer for troubleshooting (not through a hub). If 5V does not reach the interface, the interface may have connection issues, but it is unlikely to damage the interface. It is not the cable length per se that is the issue, but is that not all computers deliver full voltage and current. SSL recommend USB cables up to 3 meters or 10 feet. Beyond that length you must use a powered hub or powered extender. ![]() USB 2.0 specifies an absolute maximum of 5 meters (16 feet). Longer lengths result in voltage reduction and may not deliver the full 5V to the interface. You are welcome to try cables as long as you want until they stop working, it will not harm the interface. If you are having problems with a cable remove any hubs, try the included cables, or shorter cables. The full power of the USB port must reach the interface, otherwise it may not work. That is the specification for USB 2.0 and within the specification for USB 3.0. Some always-on ports can be disabled in BIOS. It is ok to leave the interface always on, but for saving electricity it is ok to turn it off too. The SSL 2 is USB bus powered and will turn on and off with your computer unless you use an always on charging port. SSL is compatible with USB 4.0 because USB 4.0 is backwards compatible. SSL interfaces utilize USB 2.0 and it will make no difference the type of cable connector you use on your computer. The type of USB connector on your computer will determine which cable to use. SSL provides both USB-C and USB-A cables. The connector on the back of the SSL 2 series is USB-C. SSL interfaces now have loopback available through the Loopback Firmware Update. Linux has not been more thoroughly tested and cannot be guaranteed. SSL have tested Ubuntu 18.04.3, 19.10, 20.04 and Fedora 32 with a simple audio IO test. However, many Linux OS support class compliant devices. In that case, the camera adapter may not apply Some newer iPads are USB-C instead of Lightning. ![]() A powered USB hub (unlike a computer, an iPad does not supply power) - this hub must be capable of delivering 5V and more than 0.5A.Apple Lightning to USB 3 Camera Adapter.To connect to a Lightning-based iPad you may need the following: SSL interfaces are not tested nor supported on Android. SSL interfaces are not officially supported with iOS, however, they are class compliant, and the iPad supports class compliant devices. You may try the 3rd party ASIO4ALL for device aggregation if needed, but SSL has not tested this driver. The ASIO drivers are multiclient, meaning multiple ASIO apps may use the interface simultaneously. SSL interfaces require the ASIO WDM driver to be installed. SSL interfaces are not compatible with XP or Windows 7/8. Our recommendation is to upgrade to a supported OS. Operation may work but is not guaranteed. Simply select the SSL as the sound device in System Preferences and you are ready to go. SSL interfaces are class compliant and work directly with macOS Core Audio.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |